What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 03:18

Here is a simplified AC power diagram.
The other is “what does a “fuse” do?”
It seems Mohan does not understand the difference between a comment and an Answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
He then describes Rainy Season and Lightning.
Galerie David Guiraud : Deep Space & Celestial Objects - The Eye of Photography
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
a photo is worth a thousand words.
Webb Captures a Cosmic Forest of Ancient Galaxies - PetaPixel
There are three different concepts here that are getting confused.
so, what happens?
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is the most memorable thing that happened in your college days?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
[old diagram got deleted by accident]
One
More studies show diet and nutrition are important in fighting cancer - WTOP
He then asserts :
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
WWDC 2025: New Features We Could See in watchOS 26 - MacRumors
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–16 [ OO OLAOYE OYEBODE ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
the problem then depends on "how fast does the fuse operate?".
2024–10–10[John johnson John Johnson ]
Can I know a love story of a medical student?
but this device (an Inductor) … impedes the rapid changes in the current.
This is where the MOV conducts again, and dissipated the energy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
About 700 Marines being mobilized in response to LA protests - CNN
Barnstars:
I post the exact comment here.
At one ohm, the resistor has a maximum of 1 watt power.
Why did my crush like me for only two days in a row?
One is “what exactly is in a ‘surge protector’ ? ”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Edit 2024–10.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What is lightning?
An AC voltage/ current source, and an ac inductive load.
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Upvotes:
These devices are installed between the “hot” and “neutral” and protective ground.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But… the neutral is now “floating” because of the 1 ohm resistance.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The third is lightning and “how it gets conducted into a home.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
nine
These are simplified answers to the original question, and does not change anything I wrote above.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
There are two important concepts here.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(Dc diagram shown, AC is similar).
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
At least they know the answer if they wanted it.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
First Sentence:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
A circuit breaker is similar, but is resettable.
But it can get overloaded, and no longer works.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
In schematic diagrams this is the symbol for a fuse:
A fuse is a non-resetable over current circuit protector.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This one hit behind the barn.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
For this case there are devices called Metal oxide varistors (MOV).